After your pool’s months-long hibernation in the off-season, temperatures are finally starting to rise, and it’s time to take off the cover. Before you start to enjoy the water, however, there are a few things you need to take care of first. Here’s a list.
Take note of any damages
Sometimes, even the best care cannot guarantee that the pool makes it through the winter without a scratch, particularly if conditions were severe. Pipes may crack, algae may attack, and the cover may take a heavy beating. Take note of any renovations needed and have a reputable pool service contractor from McKinney, TX fix any issues right away.
Clear the water
As soon as the cover is off your pool and everything is running well, now’s the time to take care of the water. This is an easy task. Start by turning off all the skimmers, and then open the pool’s main drain, pointing the return jets downward. Keep the pump running at top speed until all the water is clear. Clean the sides of the pool by brushing the sides, and throw in some algaecide.
Check if the heating system is working
Don’t let kids jump into the pool before making sure that the heating system is doing its job. It’s not uncommon for the system to stop working during the cold season. Test the entire system for about half an hour to make sure that everything is working consistently.
Let the water circulate for at least 24 hours
You’ll need to add the appropriate chemicals to the water before you can begin swimming. Once you have added them, make sure the water circulates for at least 24 hours to make sure that the water at the top isn’t different from the one at the bottom. Then you can test the water and confirm if everything’s fine.
There’s certainly no set formula for opening a pool, but there are a few things you can do to ensure the pool is safe for use. Once you get this part right, you can start to enjoy your pool early enough.