Common Garage Door Repair Issues During Winter

Common Garage Door Repair Issues During Winter

Winter can cause moderate damage to garage doors. Cold weather can freeze the door’s moving parts, wreaking havoc on electronic components, and even door frames.

Identifying these problems quickly can help technicians fix your door before the weather gets even colder. Particularly in Ontario, garage door repair specialists are equipped to handle most cold weather damage to garage doors.

Moisture in the Electronics

Moisture can build up inside electric components, shorting the circuitry when the moisture turns to frost. Cold weather can also cause cracks in the electrical wires. In a blizzard, strong winds can deposit dirt, grime, and frost in the sensors, rendering them incapable of reading signals from the remote control.

Contracting Metal

Metal components can contract during cold weather. When this happens, friction is created between the moving parts, and misaligns them. This prevents them from working in sync with each other, preventing the garage door from opening or closing smoothly.

Lubricating Grease

Lubricating grease is essential during the summer. However, it can cause problems to garage doors during winter, especially if the wrong type of grease is applied. Lubricating grease thickens quickly in cold weather, blocking the chains or screws that drive the doors open or closed.

Swollen Frames

Wooden frames absorb the moisture left by frost and snow, causing the frame to swell. This creates friction between the frame and the garage door, preventing it from opening smoothly, or from opening at all. If left unchecked, this type of damage can break the springs that act as a counterweight to the door. This can result in serious damage, and is also dangerous to the homeowner.

Homeowners can employ some DIY fixes, like installing a unit heater in the garage. Adding a weatherstrip seals off the space between the garage door and the floor, keeping the chill out in this way. However, resolving mechanical issues should always be left to professional technicians.